Piano Find and Piano Bench Re Upholstered

Did you know that many of your Cities and School Districts have surplus stores? I found out a couple of weeks ago that my kids school district has a surplus store, is open on the first and third Tuesday of each month during the school year between 6:30 am and 9:30 am. Crazy and not very many hours. If you want the really good stuff you go when the school year starts. They have shop tools, kitchen appliances, preschool play sets, T.V's, stereos, chairs and lots more! A friend went last month because he heard that they have pianos. He was able to go and buy a piano for $150! He also told me that there were 2 left. I had to get me one. I played when I was a lot younger and have wanted my kids to play but could never afford a piano. I couldn't really afford this one but couldn't pass up on the deal! When we got there they told us that one of the pianos was untuneable. I'm guessing the sound board is cracked. So I was hoping the other one was in good shape. When I saw the piano I played a few notes and I was sold. It will need to be tuned but that will be another day! 

Since it came from a school it had these large casters on them. I want to change them because I don't like the look but they sure do make it easier to move!

I was so excited to get the piano that I didn't even notice that it was missing a leg! I can fix that, someday!

My dad came over today and we were talking about the piano. I told him all I need now is a piano bench! He said he had one at home! Yeah! I don't have to pay for one! I knew it would be in rough condition. The bench is in as good as condition as the piano. I want to refinish the piano and the bench to be the same color and fix some of the scratches. For now I decided to re upholster the bench. It was pretty gross looking. I took a close up of the fabric but decided to spare you the grossness! 

It was pretty easy to take apart. Only four screws! I took off the old fabric to find an even older fabric underneath. I didn't take that one off because I was afraid to find out what was underneath that! I went through my stash of fabric to see if I had something that I could use to reupholster the bench. I added a little more batting over the really old fabric then added some red vinyl over that. 

Here is the (almost) finished project.

This is what the sides of the bench look like. When I decide a color for the piano I will take care of the bench at the same time. 

Here is a close up of the vinyl.

Now all I have to do is find a piano teacher for my 5 kids that won't cost an arm and a leg!!!

Up Cycled Bangle Bracelet

While recently shopping I saw some cute bangle bracelets that had flowers on them. I knew that I could make my own! And definitely for a lot less money! The best thing is that very few supplies are needed and you probably have them laying around. For this I used vinyl fabric, thread, scissors, needle, button or button maker and extra fabric if you want to make your own button and a flower pattern. These particular Bangle Bracelets are from Amate Studios. 

 Cut out flower pattern. Pin pattern onto vinyl fabric and cut. Cut two flowers of the same size.  

 Now with a crap piece of vinyl material you will make a button. Below are the pieces that come with a button kit. There is a round plastic piece that you will use to trace the fabric with. A top and a bottom to the button, a white piece that you will put the button in and a blue piece that you will use to push the pieces together. 

Use the round plastic piece to cut a piece of fabric out. 

Now you will start to layer the pieces to make the button. Put the fabric right side down on the table. Put the inside of the button (the rounded piece) on top of the fabric. Now you will put those two pieces into the white plastic. Now you will push the fabric pieces on top of the inside button piece and then put the outside piece of the button on top holding together. Now using the blue piece push the outside piece of the button down with firm pressure until the button is formed together. Pop out of the white piece and you have a button! 

 The final button! 

Layer the two flowers on top of each other so that the petals are alternating and not directly on top of each other. With the needle and thread starting in between the layers so that you don't see the end sew a circle (about where the white circle is)  in the center of the flowers and pull tightly like you are making a ruffle. Finish the stitch on the top side of the flowers and don't tie off the end yet. 

Now you will add the button to the top of the flower. The button loop isn't very big and might take a little bit of playing to get the button sewn on. Now you will start to sew the flower onto the bangle bracelet making sure to stitch in between the two layers of flowers so that you don't see the stitching on top.

Finish by tying a know in between the layers of the flower and cut the end off. 

Enjoy your flower bracelet! 

The teal flower was my trial and error one. I tried making it with sewing individual petals together. While you can't tell in the photo it is a much more flimsy flower and the button feels loose because of the flimsy base. 

Spray Painted T-Shirt with Doilies

My second son turned 17 last month and I was shopping with him at my home away from home Target. While looking at the men's clearance they had T-shirts on clearance for $2.48! They were either grey or yellow. Since yellow isn't a good color on me I bought a grey shirt that was a size larger than what I wear with the intent of altering it. 

I started by cutting off some of the length of the sleeve.

Next, I cut the neck line off and made it larger. I then used Steam-A-Steam 2 to finish off the edges of the sleeves and the neckline. I then stitched the edges with a double needle to give it a more finished look. 

Now comes the spray paint and doilies. I used 8" and 10" doilies for the pattern. I also used Krylon Black for Plastics. I used this kind of spray paint because it is what I had in my closet. You will want to put something inside of your t-shirt so that the paint doesn't go threw the back side. Here I used some foam core. You could also use cardboard, freezer paper or bunch of news papers. I also didn't want to get spray paint on the garage floor so I laid some cardboard down under the shirt. Because I wasn't sure how the shirt would look I tested with some doilies and scrap jersey material to see how it would turn out. I tried with white first but didn't like the look on grey so I used the black. 

Lay the doilies onto the shirt for placement. I played with them for a little bit before I started spraying. 

I wanted a layered look so I laid some extra fabric under the doilies where I didn't want the spray paint to go through.  

You will want to spray about 10" away from the shirt in a light sweeping motion. If you get trigger happy you will end up with some dark edges that you won't be able to fix. Each time after I sprayed the t-shirt I immediately removed the doilies.

Continue to cover up any areas that you don't want to get spray paint on and move the doilies around to finish your design. 

I sprayed the shirt 3 times but figured it need a little more.

I sprayed a few more times and even sprayed some on the sleeve.

The shirt wasn't quite fitting right so I gathered the sleeve up to the collar of the shirt. I also tailored the sides a bit to make it more form fitting. 

Here is the finished product!

I was inspired by a shirt I saw on Pinterest that used doilies to decorate their shirt. I thought that I saved it to one of my boards but can't find it. If it is your shirt let me know and I will give you proper credit. I was also inspired by a shirt that was made on The Winthrop Chronicles. 

Logo Polo Upcycled to Decorative T-Shirt

In Arizona April, May, September and October are wedding months. So the past month and a half I had wedding flowers to design every weekend on top of Easter, Secretaries Day and Mothers Day. Normally I work around 25 to 30 hours. Two week in a row I worked 60 hours each week. So no time to post and no time to create anything new. I actually designed this shirt back in March and I am finally at a point that I can post about it! (And hope that I remember how I did it)

So I have several polo shirts with logos on them that have been hanging in the back of my closet since I stopped working for the company. I knew I could upcycle them some how! So for this transformation I used 2 shirts. Start off by cutting the collar off of one of the shirts.

Next you will add this wonderful product called Steam-A-Seam 2. You will apply all the way around the edge of the collar of the shirt.

Next take off the backing of the Steam-A-Seam 2 and fold it over. Now you will use your iron to steam the seam. This will activate the adhesive and leave you with a nice finished edge. The Steam-a-Seam 2 helped the collar no not pucker when sewing and I didn't have to pin it down. Just for kicks I decided to sew a seam for a more finished look. 

Here is the finished look.

Now you will use the second shirt. First cut off the bottom edge. Next cut a 4 inch section out of the middle of the shirt. You will now have a tube/circle. Take the tube/circle and cut once to make a long strip.

Sew a Gathering stitch down the center of the strip leaving long threads at each end for gathering. 

Fold the strip in half with the stitch in the center. Using the bottom thread pull to gather the strip to make a ruffle. 

Pin the ruffle on the outside of the logo in a circle. Sew the ruffle to the shirt. Before you close the circle start to turn the ruffle 1/4 inch inside of the circle. At this point you will keep turning and sewing and turning and sewing till you get to the center of the flower. when you get to the center of the flower make a few back stitches to hold it in place. 

Here is the finished flower. Once I tried the shirt on I felt the flower was a little off centered. So I added another flower. 

After washing the shirt the flowers scrunched up a little bit and I could now see the edges of the logo. So I then stitched down the outer edge of the flower to hide the logo. I now look at shirts with logos at the thrift store a little differently and wonder what can I do to hide that logo. I hope you enjoy transforming one of your polo shirts into a t-shirt or covering up a logo just as much as I have!